Version 1.3: Added Polish.

*

This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.

"Nervousa" is an anagram for "Ravenous".

A variant of Marrada with more angles.

Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...

At the end of October I decided to dive into the new Bricks 'Connect'. I started with the lowercase 's' & 'a'. Working out what the minimal size I could fontstruct it in, then expanded and condensed it from there to accomadate the rest of the glyths. You can still see these in the font above (Just before the Latin charachters. As I progressed I came to love the thin white gaps, and then tried to have every glyth with some element of the curved white gap in it. Some were more successful than others. As you can see, I have included the less preferred options at the end. I've also designed some of the final glyphs in illustrator, as it was impossible to have all of them with one white line, without help from an external app.

The most difficult glyphs to create and ultimately the most satisfying once completed were the 'V' and '~'.

I liked the look of final font so much, that I decided to create a whole family. Cableguynium 0 (which has Zero cables), CableGuynium 2 (which has 1-2 cables per glyth), and CableGuynium 3 (Which has 3-4 cables).

Unusually I struggled naming this font, I have early versions saved called Flowonica, Rubber Tyre, Ice Skater and Fibropticon, ..... eventually settling on CableGuynium as it was the most memorable.

ANY CRITICISM, GOOD OR BAD IS WELCOMED.

A more bookish take on Comicool, made for more comfortable general reading. It's still useful for comics, as well!

Many letters were squared off in the corners, lowercase letters were given stems, and an assortment of glyphs were edited for more style.

This is the third iteration of Comicool... rather than develop them all toward one style, I tried to make each iteration the best it could be. The result is three distinct, but still compatible styles. This one is probably the best for body text!

A sci-fi font crafted while at the Pohang train station in Korea. Please enjoy

Aenvidere (the normal weight version) still needs fine-tuning and kerning, still. That will come, eventually :) At the moment I'm quite busy doing too many things concurrently.

Check the font description for AlexGar-Aenvidere for details.

At a later date I'll publish a squared-off version of this. Aenvidere SQ will have the same glyph style but will be wider than the other versions which might make it less useful as a "tool" to attract attention when added as splash insert in text that uses another Aenvidere version.

Bold super italic 45º!

Very stressful assembly of bricks, I thought I would not finish it on time. Uff! Some glyphs are still expecting to be included in the font. WIP, and kerning.

Sort of a semi recap of the lettering found on the second issue of Polish avant garde architectural magazine called "PRAESENS".

It got published throughout the first part of the previous century and was similar to other magz from that era such as: DeStijl, Wendingen & Het Overzicht.

It's not super accurate but still a fairly recognizable and cool looking type.  I already made a pro version of this lettering in the past with FontLab Studio, which closely capturing the exact original design.

Work in progress : )

Inspired by the Maze Set. A technical fontstruction showing the usage for thinner macaroni bricks. The logic for possible counter relation: 

1) Every letter is filled with thinner version of itself (self-pattern fill).

2) Outline vs Inline, emphasizing the "opposite" meaning of counter.

Serif on the inside, sans on the outside, sort of two in one.

Bals is Slab backwards. 

Inspired by the works of regular_one. Unlike most fonts I've released recently, many of the glyphs had to be modified or even redone from scratch.

- M, W, m, w, @, #, %, <, >, ~, and the circumflex above accented letters were all too wide and had to be condensed;

- I, f, i, j, l, r, and t were all too narrow and were expanded a bit, mostly through the careful application of serifs;

- K, M, W, X, Y, v, w, y, 7, /, and \ all had ugly mixes of angles that needed to be redesigned;

- N, *, (, and ) were completely redesigned, and many more touched up, to fit better with the rest of the font.

Most of the edits made were not possible before nudging. It's still not perfect, but it's much better than it was before, and I'm proud of how much it has "grown up". Of course, suggestions and critiques are encouraged. Thanks and enjoy!

An attempt to make a very readable sans similar to what you would see on streetsigns, utilizing larger curves than the average FontStruction. Uses 3x3 curves on the uppercase and 2.5x2.5 on the lowercase/numbers. A few alternates in Latin Extended-A. As always, suggestions and critiques are welcome. Thanks and enjoy!

This was another attempt at a clean geometric sans. It turned out a lot like fs vandyx, but... less "open", perhaps? Anyway, suggestions and critiques welcome. Thanks and enjoy!

Not sure what inspired this one--I think it actually started off italic, but it proved too difficult to FontStruct an italic like this back in 2014...

Create your own license plate! Surround your text with () or []. Use '_' to get a truly blank space; use '|' for an uppercase middle dot, '\' for lowercase. Some alternates are available in Latin Extended A. Suggestions and critiques welcome. Thanks and enjoy!

(2017: I think this idea was sort of a spin-off of fs quotable. I was also experimenting with clean sans like this one at the time, which contributed greatly toward the design of the inner font. The () characters are new and a few letters (regular g, alternate g and Q) have been updated, but other than that everything's pretty much the same as 3 years ago.)

Here's what happens after I temporarily lose the ability to Fontstruct... ;) This started as an experiment to get around overshoots, but took of in a slightly different direction, with a touch of Uptake. Suggestions are appreciated. Thanks!

(2017: Isn't it wonderful when you don't touch a fontstruction for 3 years and still don't see anything to improve? I don't remember why I lost the ability to use FontStruct—probably because of either a power outage or being in a moving vehicle—but I would guess I sketched this out in my graph notebook before getting back on the site.)

 I wanted to try some 'deformation' of the perspective used for italic glyphs. It was fun to try, the font looks amusing and the slants are irreverent enough. I know that a word processor could change Raysan into an italic style but a word processed Raysan would be too predictable and without creative spark.

Despite the purposeful changing of lines specially the curved sections which don't follow any "perspective rule" this font looks italic. It has a pleasant rythm in longer headlines etc, and gives eye catching 'splash' text when used with the parent font.

It took quite a while to finish, I constantly fought the wish to make composites and stacks to get the correct shape and directions into the curves.

Deceptively simple.

This fontstruction was made possible by several fontstruct special capabilities: connecting brick, brick stacks, custom bricks, and nudge. Out of 68 bricks used, only the full square brick is from the available bricks; the remaining 67 bricks are all modified in some way or another.

3 bricks tall.