A sans-serif pixel font meant to be somewhat small and very legible. This is just my PlainAndSimple font with added Latin-1 characters and some adjustments to numbers and punctuation in Basic Latin. Most upper-case glyphs and numbers are 5 blocks wide plus 1 block for spacing, and from baseline to caps-height is 8 blocks. The descender is 2 blocks below the baseline, and accents on capital letters can go up an extra 3 blocks, so the total max height of a line is 13 blocks. Lower-case letters tend to be less wide than upper-case ones.This is a clone of PlainAndSimple
Here is an extended version of my Atemayar Rigid Script. This script has taken me years to get to the point where it is. I do plan to complete it however I figured I would release it with the current list of characters that I have created. While I plan to complete it, it will be some time before this is achieved so please bear with me as life tends to get in the way sometimes.
I began this font August 31, 2017, and I'm releasing it 30 days short of its 2 year anniversary.
Based off the original alphabet of Atemayar Qelisayér featured on Omniglot created by Simon Halfdan Hvilshøj Andersen. Credit for all the original characters of this alphabet goes to him, as well as credit for inspiration. Some characters in this alphabet are wholly original to this font (most are not however), these are inspired wholly by the original Atemayar alphabet in one way or another.
I truly and sincerely hope you enjoy, this font is made for all to enjoy and to spread such a beautiful alphabet to be used for all languages and all writing systems. I love Atemayar more than any existing writing system, I take all my notes in it, and I yearn for Simon Halfdan Hvilshøj Andersen's alphabet to be spread around the world and used by many.
The alphabets can be categorized into groups based on the following criteria:
- Pseudo-Atemayar: shares no letters with Atemayar, but appears similar
- Semi-Pseudo-Atemayar: shares a few characters with Atemayar, but overall still looks like its base alphabet and can't be read by Atemayar users
- Modified Atemayar: Follows all/most of the same letters as Atemayar, however has added or modified letters as well
- Classic Atemayar: Original Atemayar alphabet without change
The alphabets' classifications are as follows:
Basic Latin: Classic (except X, which is a ligature of K and S)
Punctuation (all except . , : ; ? ! ... " '): Modified
More Latin: Modified
Extended Latin B: Modified
Extended Latin A: Modified
Greek & Coptic: Modified
Arabic: Modified (reversed letters)
Devanagari: Modified (line above letters)
Hebrew: Modified (reversed letters)
Bopomofo: Modified (dots above letters, ligatures)
Name is a pun and a work-in-progress.
This is my first try at a serif-style font.
If you need any character set specifically, message me and I'll add them ASAP.
-Basic Latin 100%!
-Latin Supplement 100%!
-Latin Extended A 100%!
-Latin Extended B ~60%
Planned: Cyrillic, Greek & Coptic, Latin Extended Additional
More coming soon!
The only rule is simple: I was only allowed to use five shapes, although I could make composite shapes out of these shapes. More characters to be released soon. FYI: The numbers have sharp points to distinguish them from the letters.
Version 1: Basic Latin
Version 1.6: Some of the "More Latin" glyphs. These were hard to make! :| They don't look the greatest-any suggestions?
I made in pursuit of cuteness.
This is for English and European languages only
There are no Japanese characters.
Postscript: The upper part of A was adjusted to "Δ" or "Λ".This is a clone of 15*15dot-European
This font is a clone of "15 * 15dot-ariake".
Additions and extensions of Latin characters, and Greek and Cyrillic characters are also included.
In addition, in the area to display Hangul
I wrote Braille in the sequence of Louis Braille's Braille Table.
This is my first font which includes the "More Latin" set.
This font is based on the 2002 GBA game of the same name
This was a simple idea started from S and T. Most of the glyphs have two verticle strokes that are 4-bricke-wide and a 1-brick-wide area in the middle of the character. except I, L, S and T (actually a lot more). They are a bit different. Especially S, T and L. The whole characters are only 8 bricks wide. As I mentioned above, It's because the whole font started from these characters.
Straka the name came from last name of a person. The S and T reminds me of this person's last name. I like this last name although I don't even know him.
About the Latin extension, I have made only the glyphs that require no new design, just diacritics and already made letters. So I can pretend like hard-working on fonts but copy paste in reality. :P
Also, I made Arabic glyphs. Only isolated forms. Which I suppose won't be a comfortable experience to Arabic users. It's like every letter has crazy swashes but every letters are lightyears away from each other.(or is it?)
Credit me bcuz it took days and I gave it all to you for free. Unthankful hairless ape. :p
has it gone 2 far? hope it didn't hurt you.
A cubed slab font is like Rockwell Font. It's more a serif font, the original name is Chino because in the tags there are a tag that says "Chino". the half blocks is for the Uppercase N.
Experimental cyberpunk robot mosaic thing.
It gives me a strong "system font" feeling and seems like something that might be included with the OS of some futuristic tech deck. If the Fairlight Excalibur from Shadowrun Returns had its own font, this could be it!
Original size: 21pt (use multiples of this size for pixel perfection)
AZUL is BLUE in Spanish. I choose the word blue because it always reminds me of ultra bold fonts. But i feel like just "BLUE" looks dumb so i choose "AZUL" instead. Btw blue in Chinese is "lan". Just imagine "LAN" as it's name lol.
Least important stuff :
I got this idea when i was thinking about if I design a poster for a JoJo character. it'd be Kira Yoshikage. And I was like "Gotta need a ULTRA bold font to show he's really danger" Now you know this totally unuseful thing :P
A little more important stuff :
This font is free for all use.
DO NOT PRESS THE B SYMBOL WHEN YOU USE THIS FONT. SERIOUSLY, DO NOT
lqi laugh quietly inside
My first unique font. It's original, sometimes cartoony, and stylish.
Ehonore (Version 1.0) contains:
all -"Basic Latin",
-"More Latin", and
-"Google Fonts Basics"
Characters, as well as romanian special characters T & S with comma, and hungarumlaute. (double-acute O & U)
This font is free to use, mayble I'll even set it up for Google Fonts...
I hope you have fun.
Inspired by my friend Ehre.
I decided to improve some characters, and I'm happy with the results.
I made some lowercase letters smaller, plus I changed some letters which bothered me, by looking too "cartoony".
Russian letters are finished, if you have any special requests for characters, just tell me. I hope I'll be adding more cyrillic letters in the near future.
I've extended the lowercase letters a bit, to make it look more uh... aesthetic, I guess.
MOS 2018 /moʊz twɛntɪ eɪtin/ is a minimalistic, designy font aiming to simplify English lowercase letterforms as much as possible while keeping them recognizable to some degree, using a 3x3 grid.
Bookish pixel font designed for general reading. Made for use in my own future web designs.
This has proven to be my most popular font around the web, at least in terms of favorites. If you'd like to see support for your language added, post a comment and let me know which letters are missing.
one of microsoft pre-installed font "Broadway" inspired me. However, fs is not a good tool for curves. I got it great in my way.
Pixellated Proxima Punch. It's art deco for your ancient compy box! New smaller grid, same great taste.
Original size: 6pt. Use multiples of this value for pixel perfection. However, this one has been noted to look great at almost every smaller size. Try 7pt, 8pt, 9pt, etc. for slight variations on the look!