A monospaced version of Barcade Brawl that has been modified to work well as a roguelike font. Not every glyph is centered yet, but all the Basic Latin and More Latin ones are.
A few glyphs (such as #) are modified to break the matrix so that they link together. This is because these glyphs are used to form continuous walls and other structures.
Note also that this design uses a 7x7px matrix which is monospaced at 8px to create 8x7 tiles. I have placed a stray pixel on an unused glyph to make 1px of extra line spacing occur so that the final tiles are 8x8. The preview here onsite adds another px, so it looks slightly out of square. The sample below does too, because it was made before this fix was implemented.
I was working on another spinoff of this that was high-resolution rather than pixel, but since this font has the same LC and UC, I might transplant those glyphs to this font as well to make it as multifunctional as possible. That will more than double the work of making an already big font, though, so it will depend on whether this font gets used by others. A few game developers already use the original "Barcade Brawl" so there is a possibility...
Original size: 5.25pt (use multiples of this size for pixel perfection)This is a clone of Barcade Brawl
Font from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
Original size: 5.25pt (use multiples of this size for pixel perfection)
The 5x5 pixel font used for the Virtual Gremlin, an old emulator/game I wrote. The standard font for ingame text.
This font was also designed to work well with IRC clients and ASCII games (see sample).
Breaking the 5x5 grid was unfortunate but necessary in order to make legible characters in non-Latin languages.
Version 1.5: All permutations of E and F were refined and improved.
A modernized, rounded, and truncated version of Marengi. This is made to be a good text editor/chat font. It has very few kerning pairs, so it should render fine in any software.
Ascenders are only allowed to be as tall as the uppercase/numerals, while descenders are allowed to go 2px below the line. This creates a natural line spacing that is readable and not too dense. (Diacritics break this rule, of course... darn them...)
Gone are the curved descenders/termini on letters like gjty. The simpler geometry makes this design more suited to speedreading than its predecessor. In fact, altering those four letters alone improves speedreading on this font by up to 14%!
09JUN2019: I have been using this as my main IRC/chat font for some time now. Of all my chatfont designs, this has proven the easiest to read and use.
Original size: 6pt (use multiples of this size for pixel perfection)
Just a doodle... Inspired by @, of course!
This makes me think of icons/dingbats and ASCII roguelikes.
Original size: 6.75pt
See also:Limbus 2
A vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.
I use multiple text editors, and made this font to be an alternate font for Windows Notepad.
This was designed to be similar to Marengi Mk2, the font used in my FS Tutorials. Apart from using a smaller grid size, Eglantine achieves a closer line spacing through the use of short ascenders/descenders and the removal of the dots from i and j. It is also more condensed and optimized for speedreading, resulting in a font that is pleasant to read despite being quite small.
This design does have some wasted matrix, but this is necessary to achieve the desired effect. The global matrix is still only 7px tall, so this can still be used on most small canvasses.
Original Size: 4.5pt
An experiment in subtle asymmetry (it's most evident in the upper case).
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
See also:Navajo Deco
Badwolf, with curves changed to angles. To my eye this makes it less "decolike" but more "engraved".This is a clone of Badwolf
With the increased boldness, this design loses its decolike look in favor of a slightly more sci-fi one.
A lot of broken glyphs had to be fixed for this... I think I got 'em all...This is a clone of Badwolf
Version 1.3: Added Polish.
Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!
It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.
This font has also found some use on signage at a friend's bistro!
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
Original size: 20.75pt (use multiples of this value for pixel perfection)
The main font used by MARENGI Omnisystems in my video game series, "Endless Sea Of Stars". These letterforms can be found engraved into or projected onto practically every piece of MO technology. This script was designed in 2011 to be suitable for printing, logo design, art, and many other purposes. It lacks the constant height which most of my other pixel fonts have, but makes up for it with its bookish appearance.
Unfortunately, replicating the exact design of the antialiased version of this font is impossible, not only on FontStruct, but on all software other than ESOSVM. This is because ESOSVM uses a custom renderer which makes use of proprietary techniques. Marengi HD comes close, but not very.
2.6 (19Aug2018) - "bdďđ" were perfected. Space width reduced.
2.5 (20Jul2018) - "IÌÍÎÏø" were perfected and massive kerning work began.
2.4 (15Jul2018) - "J" was perfected and several letterwidths were altered.
2.3 (18May2018) - "hnru34679ÀÁÂÃÅÈÉÊÌÍÎÏÑÒÓÔÕØÙÚÛÝÞßàáâãåæçèéêìíîïñòóôõøùúûý" were perfected.
2.2 (17May2018) - ":;gjty%/\ÂÆÊÎÔÛâæêîôû¼½¾" were edited for more consistency and readability.
Original size: 11pt (use multiples of this value for pixel perfection)
An attempt to make an entire alphabet by modifying a single heptagon shape. (The "O" is the basis for almost all other glyphs.)
An alternate version of this was made in which I used different bricks to make the width of every line homogeneous. However, it was found that this robbed the font of much of its character. Additionally, the visual effect presented by the increased line width actually made the font less even-looking than it is now. This proved true with and without antialiasing.
Version 1.2: Added Greek and Polish.
An attempt to do large rounded shapes using only the stock FS bricks.
I built diamonds sized according to the Fibonacci series, then made a segmented display out of them. The design was then carved away to make the glyphs you see here. I used the members 1, 2, 3, 5, and 8. These sizes proved most feasible to work with in this sort of arrangement.
I gave the terminals a flared appearance which I think makes the glyphs look slightly Celtic. The design also makes me think of beach sand and things found on the beach - shells, pretty rocks, and so on.
An alternate take of Diamond Eyes with circles replacing the 2 smallest diamonds. No brickswapping used - many diamonds shared bricks so I had to place the circles by hand. This permutation introduces more texture, solidity, and complexity to the original. Hope ya like it!This is a clone of Diamond Eyes
A continuation of Tangereen. This version took a lot of figuring out and a lot of changes, both aesthetic and structural. I managed to make it different from other double-line designs like Glitzfang and Junglira while still keeping it simple and cute.This is a clone of Tangereen
Bookish pixel font designed for general reading. Made for use in my own future web designs.
Version 1.5: Added Greek and made many refinements. Also came up with a new tilde design for all the glyphs that have one.
By request, a casual art deco design.
An experimental take on Laconica with Celtic knotwork. I'm not sure how to balance it better than this... any ideas? I'll do all the glyphs once I have a complete set of solutions for them.This is a clone of Laconica
A hollow/unfilled Laconica! :D
This was about five times as work-intensive as the original Laconica, even after accounting for the fact that I didn't add Greek to this one.This is a clone of Laconica
The final Laconica?
This idea emerged while making Laconica Skeleton, so I decided to carry it out. The design reminds me of blueprints and floor plans, thus the name.This is a clone of Laconica Skeleton
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
See also: Hydrangea Unicase
Another brickswap of Marengi. This one will be programmed into actual marquee displays, some physical and some software-based. If only the glow of the LEDs could be simulated with bricks!
Original size: 11pt (use multiples of this value for pixel perfection)This is a clone of Marengi
Marengi Serif. It's like Marengi, but with serifs!
The serifs give this a wider, more open/airy feeling. Slightly less readable than original Marengi, but slightly more pleasing to look at.
Original size: 11pt (use multiples of this value for pixel perfection)
------------------------------------------------------------------This is a clone of Marengi